This design was part of our 2024 SEPT releases and has been archived to the Serev3D Vault.You can still get the files:
– by purchasing it in our Serev3d web shop, or
-by keeping an active paid Patreon membership with us for 3 consecutive months: on the 3rd month we unlock The Vault for you with the access to our entire Serev3d library!

————————–

If you already have the file, here is all the INFO:

In the download we provided 3 different versions: Full version, multi parts, and multicolor version.

Print difficulty level: Beginner to Intermediate

Recommended print settings: (If you use Bambu or Orca slicer, all the print settings are automatically loaded in each version’s 3mf files)

-Layer height: 0.16mm , if you want even finer details you can set it even lower (Also you can turn on Adaptive Layer Height if you want less visible layer lines on the top surfaces of your print)

-Wall loops: 3

-Infill: 10%, Gyroid

-Supports: you can turn on Auto Tree support with a threshold angle of 28-30 degrees, TopZ Distance 0.28, BottomZ Distance 0.2.
Be careful at the parts of the claws, since it’s a thin part of the print it’s better use a blade/knife or thin pliers to carefully remove the supports from those parts.)

Estimated print time: 5h

—————————-

Resources

Filament: Polymaker PLA Matte White

Filler Primer: Rust-Oleum Filler and Sandable Primer Spray 

Sandpaper: 3m Pro Grade Grit: 120, 3m Pro Grade Grit:220, 3M Wetordry Sandpaper Grit: 600
 and/or Bates- Sandpaper, 18 Pack, 12 Grits, 120 to 3000

Primer: Rust-Oleum Painter’s Touch Spray Paint White

Paint: Fantastory Craft Acrylic Paint Set

Clear coat finish: Rust-Oleum Matte Clear Coat or if you want glossy look Rust-Oleum Clear Gloss

—————————–

(if you have a multi-color AMS printer, you can also just print the colored 3mf file, but in our opinion, a real post-processing will always give a more real lifelike touch to the prints!)

Post-processing steps:

  • Sanding: Start with coarse sandpaper (120 grit) to smooth layer lines, then use finer grits (220) and lastly (400-600) for a more polished surface. (be careful with the claws and sword part, they are very thin and delicate, with PLA they might break easily if you use too much force on them)

  • Filler Primer: Apply a filler primer coat to cover imperfections. Let it dry completely.

  • Wet Sanding: Use 400-600 grit sandpaper for wet sanding the primer, repeating as needed for smoothness.

  • Final Primer Coat: Apply a thin layer of regular primer to create an even base for painting.

Painting & Sealing: Paint with your chosen color from the acrylic paint set, then apply a clear coat (matte or glossy) for protection and finish.

 (Allow each layer to dry fully before moving to the next for the best results.)

—————————–

Have fun, we are looking forward to see your 3d prints!

Don’t forget to show off your awesome makes on 

►Our Patreon chats: https://www.patreon.com/serev3d/chats

►Or in our SEREV3d facebook group: https://www.facebook.com/groups/1569100737016945

Other popular 3d print groups to show off your makes:
–3d Printing for Beginners and Pros
–F**k that, I’ll just 3D print it!
–3D Printing ⚙️