When we recently saw this terrifying-looking Venom Frog in the trailer of the new Venom movie, we thought right away: this thing needs to come alive! So here it is, we released the single color stl file version as a freebie for anyone to download:

⭐Venom Frog (single color, stl version)

►Click here to grab the Multicolor 3mf version of Venom Frog, and all our latest designs from the SEREV3d Current download links board (Accessible for paid members)

UPDATE:
We added a filament catcher – poop chute version too of Venom Frog, requested by our member TrapJawDad!

———————–

Recommended filaments:

►Bambu PLA Basic (White or Black)

Or, you can use Metallic pla:

►Bambu Metal PLA

Recommended Printer (now it’s on Black Friday Sale)

►Bambu P1S – Combo AMS system
————————

Print difficulty level: Beginner

Recommended print settings: (If you use Bambu or Orca slicer, all the print settings are automatically loaded in the 3mf file)

-Layer height: 0.2mm

-Wall loops: 3

-Infill: 10%, Gyroid

-Support: You can activate Auto Tree supports with a 30 degree threshold angle, TopZ distance 0.28, BottomZ distance 0.22 (like that the supports will be easy to remove at the end. Don’t forget to wait until your print cools down completely, before trying to remove supports!)
Be careful to remove supports gently from the tongue area since it’s a thin part!

Estimated print time: 2h45m

Post processing instructions:

(if you have a multi-color AMS system printer, you can also just print the colored 3mf file, but in our opinion, a real post-processing will always give a more real lifelike touch and originality to the prints!)

Post-processing steps:

  • Sanding: Start with coarse sandpaper (120 grit) to smooth layer lines, then use finer grits (220) and lastly (400-600) for a more polished surface.

  • Filler Primer: Apply a filler primer coat to cover imperfections. Let it dry completely.

  • Wet Sanding: Use 400-600 grit sandpaper for wet sanding the primer, repeating as needed for smoothness.

  • Final Primer Coat: Apply a thin layer of regular primer to create an even base for painting.

  • Painting & Sealing: Paint with your chosen color from the acrylic paint set (black and white acrylic mainly, and you can mix pink and red colors for the mouth and tongue),
    When you’re done with painting, apply a clear coat (matte or glossy) for protection and finish.

     (Allow each layer to dry fully before moving to the next for the best results.)

Resources for painting and post processing:

Filament: Bambu PLA Basic (White or Black)

Filler Primer: Rust-Oleum Filler and Sandable Primer Spray 

Sandpaper: 3m Pro Grade Grit: 120, 3m Pro Grade Grit:220, 3M Wet or dry Sandpaper Grit: 600
 and/or Bates- Sandpaper, 18 Pack, 12 Grits, 120 to 3000

Primer: Rust-Oleum Painter’s Touch Spray Paint White

Paint: Fantastory Craft Acrylic Paint Set

Clear coat finish: Rust-Oleum Matte Clear Coat or if you want glossy look Rust-Oleum Clear Gloss

—————————–

►Click here to grab all our latest designs from the SEREV3d Current download links board (Accessible for paid members)

—————————————————
Have fun, we are looking forward to see your 3d prints!

Don’t forget to show off your awesome creations, or make requests for future designs on:

►Our Patreon chats: https://www.patreon.com/serev3d/chats

►Or in our SEREV3d facebook group: https://www.facebook.com/groups/1569100737016945

Other popular 3d print groups to show off your makes:
–3d Printing for Beginners and Pros
–F**k that, I’ll just 3D print it!
–3D Printing ⚙️