This design was part of our 2024 DEC releases and has been archived to the Serev3D Vault. You can still get the files:
– by purchasing it in our Serev3d web shop, or
– signing up for an Annual Membership on our patreon (with a 15% discount, you get access to all our files at the Serev3D Vault), or 
-by keeping an active paid Patreon membership with us for 3 consecutive months: upon your 3rd billing, we unlock The Vault for you with the access to our entire Serev3D library!

————————–

If you already have the file, here is all the INFO:
Versions provided: stl and painted multicolor 3mf versions.

Print difficulty level: Beginner

Size: 63mm(2.48 inches) diameter

Recommended print settings: (If you use Bambu or Orca slicer, all the print settings are automatically loaded in each version’s 3mf files)

-Layer height: 0.2mm (if you want less visible layer lines, you can set it to 0.16mm or 0.12mm)

-Wall loops: 2

-Infill: in the range of 7-10%, Gyroid

-Supports: No supports needed:)

———————————————-

“STEAL THEIR LOOK” instructions

Version1- Handpainted, 100% scale, print time 1h

Filament: Bambu PLA Matte

Filler Primer: Rust-Oleum Filler and Sandable Primer Spray 

Sandpaper: 3m Pro Grade Grit: 120, 3m Pro Grade Grit:220, 3M Wet or dry Sandpaper Grit: 600
 and/or Bates- Sandpaper, 18 Pack, 12 Grits, 120 to 3000

Primer: Rust-Oleum Painter’s Touch Spray Paint White

Paint: Fantastory Craft Acrylic Paint Set 
OR XDOVET Airbrush Paint, 28 Colors Airbrush Paint Set

Clear coat finish: Rust-Oleum Matte Clear Coat or if you want glossy look Rust-Oleum Clear Gloss

  • Post-processing steps (if you don’t mind the layer lines being too dominant, you can skip the sanding part, and jump right to the primer coat and painting)

    • Sanding: Start with coarse sandpaper (120 grit) to smooth layer lines, then use finer grits (220) and lastly (400-600) for a more polished surface.

    • Filler Primer: Apply a filler primer coat to cover imperfections. Let it dry completely.

    • Wet Sanding: Use 400-600 grit sandpaper for wet sanding the primer, repeating as needed for smoothness.

    • Final Primer Coat: Apply a thin layer of regular primer to create an even base for painting.

    • Painting: Paint with your chosen color from the acrylic paint set or if you have airbrush set, you can paint with that too, definitely much faster:)

    • Finish: Seal with Rust-Oleum Matte Clear Coat for a subtle finish or Clear Gloss for a shiny effect.

(Allow each layer to dry fully before moving to the next for the best results.)

———————-

Version2-Dual silk filament, 100% scale, print time 1h

Filament: Bambu Silk Dual Color

Steps:

  • Print with dual silk filament: don’t forget to put your filament setting preset to silk, since it usually needs different temperature than PLA

————————

►CLICK HERE to grab them and dozens of other models from the SEREV3d Current download links board (Accessible for active paid members)

————————

Have fun, we are looking forward to see your 3d prints!

Do you want to be a Serev3D “Maker of the Month”?

Participate by tagging us @serev3d and use #serev3d in your social media posts, so we can find & repost your awesome makes and give you shoutouts!

Every month we will prepare a little something (bambu store gift cards, or a fully exclusive design etc.) for the person who’s the busiest in the month printing and posting about their awesome makes of our Serev3d designs!

You can also ask questions, make fun requests for future designs and show off your makes on:

►Our Patreon chats: https://www.patreon.com/serev3d/chats

►Or in our SEREV3d facebook group: https://www.facebook.com/groups/1569100737016945

Other popular 3d print groups to show off your makes:
–3d Printing for Beginners and Pros
–F**k that, I’ll just 3D print it!
–3D Printing ⚙️