►DOWNLOAD it from the SEREV3d Current download links board (Accessible for active paid members)

Next to all the Christmas related things we did not forget about some of the awesome spooky stuff either:) The Skull Rose is coming with a LOT of different versions!

Versions provided:
-Paintbrush (or pen) holder (multicolor 3mf version too)
-Ring
-Pendant
-Hanger (multicolor 3mf version too)

————————–

Print difficulty level: Beginner to intermediate

Recommended print settings: (If you use Bambu or Orca slicer, all the print settings are automatically loaded in each version’s 3mf files)

For the Paintbrush version:
-Layer height: 0.2mm

-Wall loops: 2

-Infill: 8%, Gyroid

-Supports: Auto Tree supports, TopZ distance 0.28, BottomZ 0.2 (it will add a little amount of supports under the some of the leaf parts)

For the Ring and Pendant versions:
-Layer height: 0.08mm

-Wall loops: 3

-Infill: 10-15%, Gyroid

-Supports: Auto Tree supports, TopZ distance 0.14, BottomZ 0.1

For the Hanger version:
-Layer height: 0.2mm

-Wall loops: 3

-Infill: 10-15%, Gyroid

-Supports: Auto Tree supports, TopZ distance 0.28, BottomZ 0.2

——————————-

Printed on:
–Bambu P1S

Recommended filaments:
If you want to paint on:
–Bambu Matte PLA

If you plan to print without painting:
–Bambu Dual Silk PLA or
–Bambu Gradient PLA

—————————-

Painting and post-processing recommendations:

for Paintbrush or Hanger version

Painting recommendations:
Filament: Bambu Matte PLA

Filler Primer: Rust-Oleum Filler and Sandable Primer Spray 

Sandpaper: 3m Pro Grade Grit: 120, 3m Pro Grade Grit:220, 3M Wet or dry Sandpaper Grit: 600
 and/or Bates- Sandpaper, 18 Pack, 12 Grits, 120 to 3000

Primer: Rust-Oleum Painter’s Touch Spray Paint RED

Paint: Fantastory Craft Acrylic Paint Set 
OR XDOVET Airbrush Paint, 28 Colors Airbrush Paint Set

Clear coat finish: Rust-Oleum Matte Clear Coat or if you want glossy look Rust-Oleum Clear Gloss

  • Post-processing steps (if you don’t mind the layer lines being too dominant, you can skip the sanding part, and jump right to the primer coat and painting)

    • Sanding: Start with coarse sandpaper (120 grit) to smooth layer lines, then use finer grits (220) and lastly (400-600) for a more polished surface.

    • Filler Primer: Apply a filler primer coat to cover imperfections. Let it dry completely.

    • Wet Sanding: Use 400-600 grit sandpaper for wet sanding the primer, repeating as needed for smoothness.

    • Final Primer Coat: Apply a thin layer of regular primer to create an even base for painting.

    • Painting: Paint and add some shades, details and weathered look with your chosen color from the acrylic paint set or if you have airbrush set, you can paint with that too, definitely much faster:)

    • Finish: Seal with Rust-Oleum Matte Clear Coat for a subtle finish or Clear Gloss for a shiny effect.

(Allow each layer to dry fully before moving to the next for the best results.)

———————–

Ring and Pendant version

We recommend to print it completely black, and then use metallic Rub ‘n Buff® Wax Metallic Finish to give a nice metallic touch.
Also, with these kinds of small jewelry, electroplating works beautifully.
If you want to dive deeper into the mastery of it, check out this useful detailed blog:
– Electroplating 3D Prints
Or if you want a quick but efficient result, you can always use spray paint with some nice chrome or metallic color!

Ring sizes:

-62.7mm circumference – 20mm diameter – ring size 10.5: is at 100% scale

-60.2mm circumference – 19.15mm diameter – ring size 9.5: is at 96% scale

-57.6mm circumference – 18.3mm diameter – ring size 8.5: is at 92% scale

-55mm circumference – 17.5mm diameter – ring size 7.5: is at 87.7% scale

-52.5mm circumference – 16.7mm diameter – ring size 6.5: is at 83.7% scale
——————————-

►CLICK HERE for all the latest models from the SEREV3d Current download links board (Accessible for active paid members)

———————–

Have fun, we are looking forward to see your 3d prints!

Do you want to be a “Serev3D Maker of the Month”?

Participate by tagging us @serev3d and use #serev3d in your social media posts, so we can find & repost your awesome prints and give you shoutouts!

  • After every Serev3D print you do and make a post by tagging us, we’ll give you +1 Serev3D Maker Gem💎 for it, by the end of each month, we’ll take a look on the list of people who collected the most Maker Gems💎 and give the reward for the Maker of the Month:

    •  -Every month we will prepare a little something (bambu store gift cards, or a fully exclusive design request, promotion to your store etc.) for the person who’s the busiest in the month printing and posting about their awesome makes of our Serev3d designs!

You can also ask questions, make fun requests for future designs and show off your makes on:

►Our Patreon chats: https://www.patreon.com/serev3d/chats

►Or in our SEREV3d facebook group: https://www.facebook.com/groups/1569100737016945

Other popular 3d print groups to show off your makes:
–3d Printing for Beginners and Pros
–F**k that, I’ll just 3D print it!
–3D Printing ⚙️