►DOWNLOAD it from the SEREV3d Current download links board (Accessible for active paid members)

If you have never seen a baby bantha before…now you do!:)

This unusual idea came at one of the brainstorming sessions, where we thought to make a creature inspired by the world of Star Wars…and we were like “we have never seen a baby version of a Bantha, they are always the huge adult versions, with extremely long fur and long curled up horns.

So our re-imagined baby version has little shorter horns which has just barely started curling, and the fur of it is already quite thick, but not too long so the baby’s face is still visible:)

We prepared a LOT of different versions for this new design as well:
–One full piece versions (single and multicolor 3mf with 4 colors)

–Multi Part versions (like this you can use any combinations and colors of filaments)
We added a few pins to this model as well, which helps at the assembly and to snap the parts together, but this time for the face, eyes and nose part they need a little bit of superglue to stay after the assembly (the pins would be too tiny and inconvenient for those parts)

–Keychain version (it’s a full piece version with a height of 50mm, provided in Multicolor 3mf

-And lastly: in Batch versions (for people who want to print big quantities and for our Authorized Sellers, so like this they can print it the most cost-effective way)
Just to compare: if you print only 1 in multicolor, then it takes around 6h50m and $2 in filament to finish, if you print 23 in multicolor, it takes around 23h and $8 of filament to print!:)

We always appreciate the feedbacks, let us know which versions you find the most useful, which are the ones you prefer the most! It helps us to determine how to prepare our future designs too, so they can become the most useful to you!:)

———————————–
Print difficulty level: Beginner

Recommended print settings: (If you use Bambu or Orca slicer, all the print settings are automatically loaded in each version’s 3mf files)

-Layer height: 0.2mm

-Wall loops: 3

-Infill: 8%, Gyroid

-Supports: No supports needed!:)

————————————

“STEAL THEIR LOOK!” instructions:

Version1 – Multi part version on separate plates, no painting

Printer: Bambu P1S

Filaments: Bambu PLA Matte filaments

Instructions:
Step1: Print each part on the plates from the included 3mf file (multi part on separate plates), and choose which colors of filaments you want to print it with

Step2: Assemble the parts, use a little drop of superglue to make them stay together well, and your Baby Bantha Bull is ready!:)

—————————

Version2 : One piece version, hand painted

Filaments: Bambu Matte White PLA

Printer: Bambu P1S

Primer: Rust-Oleum Painter’s Touch Spray Paint White

Paint: Fantastory Craft Acrylic Paint Set 
OR if you have an airbush set: Airbrush Paint – 30 Colors

Clear coat finish seal: Rust-Oleum Matte Clear Coat or if you want glossy look Rust-Oleum Clear Gloss

Painting & Post-processing steps:

Step1: Apply Rust-Oleum Painter’s Touch Spray Paint White as a base primer. Let it dry completely.

Step2: Painting: Paint with your chosen color from the acrylic paint set or if you have airbrush set, you can paint with that too, definitely much faster and you can paint some nice gradients with it:)

Step3: Seal with Rust-Oleum Matte Clear Coat for a subtle finish or Clear Gloss for a shiny effect.

———————————-

►CLICK HERE for all the latest models from the SEREV3d Current download links board (Accessible for active paid members)

——————————-

Do you want to be a “Serev3D Maker of the Month”?

Participate by tagging us @serev3d and use #serev3d in your social media posts, so we can find & repost your awesome prints and give you shoutouts!

  • After every Serev3D print you do and make a post by tagging us, we’ll give you some Serev3D Maker Gems💎 for it, by the end of each month, we’ll take a look on the list of people who collected the most Maker Gems💎 and give the reward for the Maker of the Month:

1 Maker Gem💎: Posting your make in our Serev3D Patreon Printing Group or in our Patreon Chats.

2 Maker Gems💎: Posting your make on your own social media profile (instagram, fb, tiktok etc.) and tag @serev3d or use #serev3d on the post.

3 Maker Gems💎: Posting your make in –> any of these 3d printing Facebook groups and using the hashtag #serev3d in your description .

The Maker of the Month reward for January will be a $40 Bambu Store Gift card!

We will announce the chosen Maker at the end of the month!:)
—–>Check out who got the award for last month here!<—–
Have fun, we are looking forward to see your 3d prints!