►DOWNLOAD it from the SEREV3d Current download links board

A new addition to our Realistic Pokemon collection!
Our realistic poke-gang is slowly growing, we made these little critters in the past months:

Which one should we do next?:)

INFO:

Our Jigglypuff design is print in place, NO supports needed!:)
Versions provided: stl, multicolor 3mf, hollowed craft eye & full eye versions, and keychain versions

—————————-

Print difficulty level: Beginner

Recommended print settings: (If you use Bambu or Orca slicer, all the print settings are automatically loaded in each version’s 3mf files)

-Layer height: 0.2mm, if you want less thicker layer lines you can set it to 0.16mm (Or even lower, or turn on Adaptive Layer Height if you want very minimal visible layer lines, but it will increase your printing time)

-Wall loops: 3

-Infill: 8%, Gyroid

-Supports: No supports needed

In the provided “ALL versions” 3mf file you can always choose which version you want to print, also if you want you can print it with AMS multicolor, or just remove the filaments in the slicer and print it with one filament.
There are many different versions to choose from!:)

———————————————-

“STEAL THEIR LOOK!” instructions:

Version – Keychain, 8mm craft eyes (0.1mm layer height), gradient filament, print time 1h

Filament: Bambu Gradient PLA (Pink Citrus)

Craft eye: Mjjmbc 100PCS Eyes Glass 8mm

—————————————————

Version – Painted, 12mm craft eye version, (0.2mm layer height) print time 1h10m

Filament: Bambu PLA Matte

Craft eye: Mjjmbc 100PCS Eyes Glass (12mm version)

Primer: Rust-Oleum Painter’s Touch Spray Paint White

Paint: Fantastory Craft Acrylic Paint Set (Use light and dark brown, black, peach and beige)

Clear coat finish seal: Rust-Oleum Matte Clear Coat or if you want glossy look Rust-Oleum Clear Gloss

——————————————————-

►CLICK HERE for all the latest models from the SEREV3d Current download links board (Accessible for active paid members)
Currently you’ll have access to all of these designs:

————————————

Do you want to be a “Serev3D Maker of the Month”?

Participate by tagging us @serev3d and use #serev3d in your social media posts, so we can find & repost your awesome prints and give you shoutouts!

  • After every Serev3D print you do and make a post by tagging us, we’ll give you some Serev3D Maker Gems💎 for it, by the end of each month, we’ll take a look on the list of people who collected the most Maker Gems💎 and give the reward for the Maker of the Month:

1 Maker Gem💎: Posting your make in our Serev3D Patreon Printing Group or in our Patreon Chats.

2 Maker Gems💎: Posting your make on your own social media profile (instagram, fb, tiktok etc.) and tag @serev3d or use #serev3d on the post.

3 Maker Gems💎: Posting your make in –> any of these 3d printing Facebook groups and using the hashtag #serev3d in your description .

The Maker of the Month reward for January will be a $40 Bambu Store Gift card!

We will announce the chosen Maker very soon at the end of the month!:)
—–>Check out who got the award for last month here!<—–

Have fun, we are looking forward to see your 3d prints!