►DOWNLOAD it from the SEREV3d Current download links board

The Baby Fire Elemental Dragon hatched in November, and now it has became a teen dragon!

Next to the Elemental Dragons, we are also planning to release a few other different types of articulated dragons, for example long articulated serpent-types. Stay tuned, we’re planning to release some of those in the upcoming weeks!

INFO:

The Teen Fire Elemental Dragon is print in place, no supports needed!:)
Versions provided: stl, multicolor 3mf, hollowed craft eye & full eye versions sized for 12mm and 8mm craft eyes, also 2 versions for the wings, full sided and flat sided wings.

—————————-

Print difficulty level: Intermediate

Recommended print settings: (If you use Bambu or Orca slicer, all the print settings are automatically loaded in each version’s 3mf files)

-Layer height: 0.2mm, if you want less thicker layer lines you can set it to 0.16mm (Or even lower, or turn on Adaptive Layer Height if you want very minimal visible layer lines, but it will increase your printing time)

-Wall loops: 3

-Infill: 8%, Gyroid

-Supports: No supports needed

-Brim: we recommend to use brim for the wings with the standing up version, Bambu studio automatically adds brims under them since it has a small contact points, but if you use any other slicer, make sure to add brims under the standing wings.
Alternatively you can also just print the flat sided version of the wings as well:)

In the provided “ALL versions” 3mf file you can always choose which version you want to print, also if you want you can print it with AMS multicolor, or just remove the filaments in the slicer and print it with one filament.
There are many different versions to choose from!:)

———————————————-

“STEAL THEIR LOOK!” instructions:

Version – Handpainted, 12mm Craft eye

Filaments: Bambu Matte White PLA

Printer: Bambu P1S

Craft eyes: JulieWang 12mm Dragon Eyes

Primer: Rust-Oleum Painter’s Touch Spray Paint White

Paint: Fantastory Craft Acrylic Paint Set 
OR if you have an airbush set: Airbrush Paint – 30 Colors

Clear coat finish seal: Rust-Oleum Matte Clear Coat or if you want glossy look Rust-Oleum Clear Gloss

Painting & Post-processing steps:

Step1: Apply Rust-Oleum Painter’s Touch Spray Paint White as a base primer. Let it dry completely.

Step2: Painting: Paint with your chosen color from the acrylic paint set or if you have airbrush set, you can paint with that too, definitely much faster and you can paint some nice gradients with it:)

Step3: Seal with Rust-Oleum Matte Clear Coat for a subtle finish or Clear Gloss for a shiny effect.

Step4: Glue the the craft eyes in the eyesockets.

———————————-

►CLICK HERE for all the latest models from the SEREV3d Current download links board (Accessible for active paid members)
Currently you’ll have access to all of these designs:

————————————

Do you want to be a “Serev3D Maker of the Month”?

Participate by tagging us @serev3d and use #serev3d in your social media posts, so we can find & repost your awesome prints and give you shoutouts!

  • After every Serev3D print you do and make a post by tagging us, we’ll give you some Serev3D Maker Gems💎 for it, by the end of each month, we’ll take a look on the list of people who collected the most Maker Gems💎 and give the reward for the Maker of the Month:

1 Maker Gem💎: Posting your make in our Serev3D Patreon Printing Group or in our Patreon Chats.

2 Maker Gems💎: Posting your make on your own social media profile (instagram, fb, tiktok etc.) and tag @serev3d or use #serev3d on the post.

3 Maker Gems💎: Posting your make in –> any of these 3d printing Facebook groups and using the hashtag #serev3d in your description .

The Maker of the Month reward for January will be a $40 Bambu Store Gift card!

We will announce the chosen Maker very soon at the end of the month!:)
—–>Check out who got the award for last month here!<—–

Have fun, we are looking forward to see your 3d prints!