Today is the day to catch a new Pokemon!

►Click here to grab Realistic Pikachu from the SEREV3d Current download links board (Accessible for paid members)

This design prints without any supports, we provided singe & MultiColor and stl versions as well.
Realistic Pikachu is the first design of October!

Recommended print settings: (If you use Bambu or Orca slicer, all the print settings are automatically loaded in each version’s 3mf files)

-Layer height: 0.2mm , if you want finer details you can set it to 0.16 (Also you can turn on Adaptive Layer Height, if you want less visible layer lines on the top surfaces of your print

-Wall loops: 3

-Infill: 10%, Gyroid

-Supports: No Supports needed

Estimated print time: 4h

—————————-

Resources to print without the need for painting or post processing:

Dual silk filament: TEQStone Dual Color Silk PLA Black-Red

OR

Gradient filament: iSANMATE Matte Gradient Red-orange

—————————

Resources for painting and post processing:

Filament: Polymaker PLA Matte White

Filler Primer: Rust-Oleum Filler and Sandable Primer Spray 

Sandpaper: 3m Pro Grade Grit: 120, 3m Pro Grade Grit:220, 3M Wet or dry Sandpaper Grit: 600
 and/or Bates- Sandpaper, 18 Pack, 12 Grits, 120 to 3000

Primer: Rust-Oleum Painter’s Touch Spray Paint White

Paint: Fantastory Craft Acrylic Paint Set

Clear coat finish: Rust-Oleum Matte Clear Coat or if you want glossy look Rust-Oleum Clear Gloss

—————————–

(if you have a multi-color AMS printer, you can also just print the colored 3mf file, but in our opinion, a real post-processing will always give a more real lifelike touch and originality to the prints!)

Post-processing steps:

  • Sanding: Start with coarse sandpaper (120 grit) to smooth layer lines, then use finer grits (220) and lastly (400-600) for a more polished surface.

  • Filler Primer: Apply a filler primer coat to cover imperfections. Let it dry completely.

  • Wet Sanding: Use 400-600 grit sandpaper for wet sanding the primer, repeating as needed for smoothness.

  • Final Primer Coat: Apply a thin layer of regular primer to create an even base for painting.

Painting & Sealing: Paint with your chosen color from the acrylic paint set, then apply a clear coat (matte or glossy) for protection and finish.

 (Allow each layer to dry fully before moving to the next for the best results.)

—————————–

Have fun, we are looking forward to see your 3d prints!

Don’t forget to show off your awesome makes on 

►Our Patreon chats: https://www.patreon.com/serev3d/chats

►Or in our SEREV3d facebook group: https://www.facebook.com/groups/1569100737016945

Other popular 3d print groups to show off your makes:
–3d Printing for Beginners and Pros
–F**k that, I’ll just 3D print it!
–3D Printing ⚙️