Today it’s time to release something cute again:)

►Click here to grab Baby Scooby from the SEREV3d Current download links board (Accessible for paid members)

We provided a few different versions of this cute design, you can find it in full one piece version, in 2 parts which is for the movable head version, and a MultiColor version too.

Recommended print settings: (If you use Bambu or Orca slicer, you can load the 3mf project files with the recommended slicing settings. (If you’re used to other settings with your machine, feel free to adjust the settings)

If you use other slicers here’s the recommended settings:

Layer Height: 0.2mm or 0.16mm if you want finer details.

Infill: 10%

Infill pattern: Gyroid

Wall loops: 2 (if you want it stronger set it to 3)

Supports: manual tree(organic) supports, you can follow the support painting guide on our provided screenshot. Only put supports on the underside of the hat, do not add supports to the inside ball attachment of the head, because it would be extremely hard to remove them.

—————————-

Resources to print without the need for painting or post processing:

Dual silk filament: TEQStone Dual Color Silk PLA Black-Red

OR

Gradient filament: iSANMATE Matte Gradient Red-orange

—————————

Resources for painting and post processing:

Filament: Polymaker PLA Matte White (or you can choose any other Polymaker PLA colors from their list)

Filler Primer: Rust-Oleum Filler and Sandable Primer Spray 

Sandpaper: 3m Pro Grade Grit: 120, 3m Pro Grade Grit:220, 3M Wet or dry Sandpaper Grit: 600
 and/or Bates- Sandpaper, 18 Pack, 12 Grits, 120 to 3000

Primer: Rust-Oleum Painter’s Touch Spray Paint White

Paint: Fantastory Craft Acrylic Paint Set

Clear coat finish: Rust-Oleum Matte Clear Coat or if you want glossy look Rust-Oleum Clear Gloss

—————————–

(if you have a multi-color AMS printer, you can also just print the colored 3mf file, but in our opinion, a real post-processing will always give a more real lifelike touch and originality to the prints!)

Post-processing steps:

  • Sanding: Start with coarse sandpaper (120 grit) to smooth layer lines, then use finer grits (220) and lastly (400-600) for a more polished surface.

  • Filler Primer: Apply a filler primer coat to cover imperfections. Let it dry completely.

  • Wet Sanding: Use 400-600 grit sandpaper for wet sanding the primer, repeating as needed for smoothness.

  • Final Primer Coat: Apply a thin layer of regular primer to create an even base for painting.

Painting & Sealing: Paint with your chosen color from the acrylic paint set, then apply a clear coat (matte or glossy) for protection and finish.

 (Allow each layer to dry fully before moving to the next for the best results.)

►Click here to grab Baby Scooby from the SEREV3d Current download links board (Accessible for paid members)

————————————

Have fun, we are looking forward to see your 3d prints!

Don’t forget to show off your awesome creations, or make requests for future designs on:

►Our Patreon chats: https://www.patreon.com/serev3d/chats

►Or in our SEREV3d facebook group: https://www.facebook.com/groups/1569100737016945

Other popular 3d print groups to show off your makes:
–3d Printing for Beginners and Pros
–F**k that, I’ll just 3D print it!
–3D Printing ⚙️