The Elemental dragons are coming one by one this November!:) Welcome to the first arrival: Baby Fire Elemental Dragon!

►CLICK HERE to grab it from the SEREV3d Current download links board (Accessible for active paid members)

INFO:

The little articulated dragon is print in place, NO supports needed!

Print difficulty level: Beginner

“STEAL THEIR LOOK!” instructions:

 

Version1: Painted, craft eye, 100% size , print time 2.5h

File: Baby Fire Elemental Dragon-Craft Eye version.stl OR 3mf

Filament: Polymaker PLA Matte White OR ZERO Basic Skin Color PLA

Craft dragon eye: JulieWang 12mm Dragon Eyes OR JulieWang 8mm Dragon Eyes (if you scale down your dragon to 69%, then it fits 8mm eyes)

Primer: Rust-Oleum Painter’s Touch Spray Paint White

Paint: Fantastory Craft Acrylic Paint Set (Use Crimson Red, Orange, Black, and Beige)

Clear coat finish: Rust-Oleum Matte Clear Coat or if you want glossy look Rust-Oleum Clear Gloss

Steps:

  • Prepare & Prime: Clean your model and apply a smooth coat of Rust-Oleum Painter’s Touch White Primer. Let it dry completely.

  • Base Color: Apply a base layer of beige paint for the body, avoiding scales and raised details.

  • Highlight Scales: Use crimson red on the scales and add orange to the tips for a fiery gradient effect.

  • Detailing: Add black accents on claws, horns, and shading around eyes.

  • Eyes: Attach JulieWang dragon eyes with glue.

  • Seal: Finish with Rust-Oleum Matte or Gloss Clear Coat for durability.

(Allow each layer to dry fully before moving to the next for the best results.)

——————————

 

Version2: Gradient filament, gem eye, suitable 69-75% scaling, print time 1.8-2.5h

File: any version in the download folder

Filament: COOKIECAD Unicorn Rainbow PLA

Gem eye: Allstarco 500PCS 8mm SS40 Blue Sapphire

Glue: Gorilla Super Glue Liquid

Steps:

  • Print with gradient rainbow filament: if you print even more dragons all at once, the gradient shift is more dominant, if you print less, the gradient shift is bigger & more subtle.

  • Attach Eyes: Place the 8mm Allstarco gems in each eye socket, attach it with glue

 ——————————–

 

Version3: MultiColor AMS, craft eye, 100% size , print time 23h

File: Baby Fire Elemental Dragon-Craft Eye version-MULTICOLOR.3mf

Filaments: Bambu PLA Basic (choose the Maroon Red, Beige, Pumpkin Orange and Black)

Craft dragon eye: JulieWang 12mm Dragon Eyes OR JulieWang 8mm Dragon Eyes (if you scale down your dragon to 69%, then it fits 8mm eyes)

Steps:

  • Print: Make sure you are opening the Baby Fire Elemental Dragon-Craft Eye version-MULTICOLOR.3mf  file, and choose the correct order of the 4 colors with your 4 spools of filament.

  • Attach Eyes: Attach JulieWang dragon eyes with glue.

———————————

 

Version4: Dual silk filament, gem eye, suitable 69-75% scaling, print time 1.8-2.5h

File: any version in the download folder

Filament: TEQStone Dual Color Silk PLA Black-Red

Gem eye: Allstarco 8mm Red Ruby

Glue: Gorilla Super Glue Liquid

Same instructions as above, for Version2.

———————-

Recommended print settings: (If you use Bambu or Orca slicer, all the print settings are automatically loaded in each version’s 3mf files)

-Layer height: 0.2mm, if you want less thicker layer lines you can set it to 0.16mm (Or even lower, or turn on Adaptive Layer Height if you want very minimal visible layer lines, but it will increase your printing time)

-Wall loops: 3

-Infill: 10%, Gyroid

-Supports: No supports needed

►Click here to grab all our latest designs from the SEREV3d Current download links board (Accessible for paid members)

———————–

Have fun, we are looking forward to see your 3d prints!

Don’t forget to show off your awesome makes on 

►Our Patreon chats: https://www.patreon.com/serev3d/chats

►Or in our SEREV3d facebook group: https://www.facebook.com/groups/1569100737016945

Other popular 3d print groups to show off your makes:
–3d Printing for Beginners and Pros
–F**k that, I’ll just 3D print it!
–3D Printing ⚙️