This design was part of our 2024 SEPT releases and has been archived to the Serev3D Vault. You can still get the files:
– by purchasing it in our Serev3d web shop (our designs are always priced lower in our shop than on Cults,Thangs and other 3d printing sites),
– OR by keeping an active paid Patreon membership with us for 3 consecutive months: on the 3rd month we unlock The Vault for you with the access to our entire Serev3d library!

————————–

If you already have the file, here is all the INFO:

In the download we provided 2 different versions: Full single color version and multicolor version.

Print difficulty level: Beginner

Recommended print settings: (If you use Bambu or Orca slicer, all the print settings are automatically loaded in each version’s 3mf files)

-Layer height: 0.2mm, if you want less thicker layer lines you can set it to 0.16mm (Or even lower, or turn on Adaptive Layer Height if you want very minimal visible layer lines, but it will increase your printing time)

-Wall loops: 3

-Infill: 8%, Gyroid

-Supports: No supports needed

Estimated print time: 2h

—————————-

Resources

Filament: Polymaker PLA Matte White or ZERO Basic Skin Color PLA

Primer: Rust-Oleum Painter’s Touch 2X Ultra Cover, Gloss Almond

Paint: Fantastory Craft Acrylic Paint Set

Clear coat finish: Rust-Oleum Matte Clear Coat or if you want glossy look Rust-Oleum Clear Gloss

—————————–

(if you have a multi-color AMS printer, you can also just print the colored 3mf file, but in our opinion, a real post-processing will always give a more real lifelike touch and originality to the prints!)

Post-processing steps:

  • Prepare & Prime: Clean your model and apply a smooth coat of Rust-Oleum Painter’s Touch Primer. Let it dry completely.

  • Painting: Use acrylic paints to add details such as spots, stripes, and shading. Apply darker colors around eyes, joints, and specific markings.

  • Extra Texturing: Use a fine brush for small areas and sponge dabbing techniques for texture.

  • Sealing: Finish with Rust-Oleum Matte or Gloss Clear Coat for durability.

     (Allow each layer to dry fully before moving to the next for the best results.)

—————————–

Have fun, we are looking forward to see your 3d prints!

Don’t forget to show off your awesome makes on 

►Our Patreon chats: https://www.patreon.com/serev3d/chats

►Or in our SEREV3d facebook group: https://www.facebook.com/groups/1569100737016945

Other popular 3d print groups to show off your makes:
–3d Printing for Beginners and Pros
–F**k that, I’ll just 3D print it!
–3D Printing ⚙️