►CLICK HERE to grab it from the SEREV3d Current download links board (Accessible for active paid members)

The 2nd Baby Elemental Dragon has arrived!:) Welcome the Earth Elemental Dragon to the baby dragon family! Every two weeks a new one is arriving to us, the next one will be the Ice Elemental dragon!

INFO:

The little articulated dragon is print in place, NO supports needed!
Versions provided: stl, multicolor 3mf, glass eye & full eye version, and keychain version.

Print difficulty level: Beginner

Recommended print settings: (If you use Bambu or Orca slicer, all the print settings are automatically loaded in each version’s 3mf files)

-Layer height: 0.2mm, if you want less thicker layer lines you can set it to 0.16mm (Or even lower, or turn on Adaptive Layer Height if you want very minimal visible layer lines, but it will increase your printing time)

-Wall loops: 3

-Infill: 10%, Gyroid

-Supports: No supports needed

———————————————-

“STEAL THEIR LOOK!” instructions:

Version1: Painted, craft eye, 100% size , print time 2.5h

File: Baby Earth Elemental Dragon-Glass Eyes version_.stl OR 3mf_

Filament: Polymaker PLA Matte White OR ZERO Basic Skin Color PLA

Craft dragon eye: JulieWang 12mm Dragon Eyes OR JulieWang 8mm Dragon Eyes (if you scale down your dragon to 69%, then it fits 8mm eyes)

Primer: Rust-Oleum Painter’s Touch Spray Paint White

Paint: Fantastory Craft Acrylic Paint Set (Use light and dark brown, black, peach and beige)

Clear coat finish: Rust-Oleum Matte Clear Coat or if you want glossy look Rust-Oleum Clear Gloss

Steps:

  • Prepare & Prime: Clean your model and apply a smooth coat of Rust-Oleum Painter’s Touch White Primer. Let it dry completely.

  • Base Color: Apply a base layer of beige paint for the body, avoiding scales and raised details.

  • Shading:

    Add acrylic dark brown tones around the edges of the scales and crevices. You can also use an airbrush or sponge for soft transitions.

    Blend darker tones into the body for dimension, focusing on shadows (under scales and folds).

  • Details:

    Use a fine-tip brush to highlight raised areas of scales with a lighter beige or peach to mimic texture.

    Paint accents like the horns or spikes in a contrasting, muted tone (e.g., ivory or light tan).
    Paint the hollow eye part with very dark brown or black.
    Add a little bit pink or peach color around the cheek area and under the eyes, it will make the little dragon 10 times cuter:)

  • Eyes: Attach JulieWang dragon eyes with glue.

  • Sealing: Finish with Rust-Oleum Matte or Gloss Clear Coat for durability.

(Allow each layer to dry fully before moving to the next for the best results.)

——————————————————-

Version2: Gradient filament, craft eye

File: any version in the download folder

Filament: Polymaker Matte Gradient PLA

Craft dragon eye: JulieWang 12mm Dragon Eyes OR JulieWang 8mm Dragon Eyes (if you scale down your dragon to 69%, then it fits 8mm eyes)

Glue: Gorilla Super Glue Liquid

Steps:

  • Print with gradient rainbow filament: if you print even more dragons all at once, the gradient shift is more dominant, if you print less, the gradient shift is bigger & more subtle.

  • Eyes: Attach JulieWang dragon eyes with glue

—————————————————

Version3: MultiColor AMS, glass eye, 100% size , print time 18h

File: Baby Earth Elemental Dragon – MULTICOLOR-Glass Eyes version.3mf

Filaments: Bambu PLA Matte (choose Dark Brown, Desert Tan, White and Black)

Craft dragon eye: JulieWang 12mm Dragon Eyes OR JulieWang 8mm Dragon Eyes (if you scale down your dragon to 69%, then it fits 8mm eyes)

Steps:

  • Print: Make sure you are opening the Baby Earth Elemental Dragon – MULTICOLOR-Glass Eyes version.3mf file, and choose the correct order of the 4 colors with your 4 spools of filament.

  • Attach Eyes: Attach JulieWang dragon eyes with glue.

—————————————

►Click here to grab all our latest designs from the SEREV3d Current download links board (Accessible for paid members)

————————————–

Have fun, we are looking forward to see your 3d prints!

Do you want to be a Serev3D Maker of the Month?

Participate by tagging us @serev3d and use #serev3d in your social media posts, so we can find & repost your awesome makes and give you shoutouts!

Every month we will prepare a little something (bambu store gift cards, or a fully exclusive design etc.) for the person who’s the busiest in the month, printing and posting about their awesome makes of our Serev3d designs!

You can also ask questions, make fun requests for future designs and show off your makes on:

►Our Patreon chats: https://www.patreon.com/serev3d/chats

►Or in our SEREV3d facebook group: https://www.facebook.com/groups/1569100737016945

Other popular 3d print groups to show off your makes:
–3d Printing for Beginners and Pros
–F**k that, I’ll just 3D print it!
–3D Printing ⚙️

———————–