►DOWNLOAD it from the SEREV3d Current download links board (Accessible for active paid members)

The Ring Bearer Mushroom has arrived!:)

He’s one of our first designs which can be printed fully in multi-parts, and fully assemble even without the need of any glue.
We will start publishing more and more designs with this method, like this you can basically print in multi color without any filament waste!
We designed the mushroom in a way that he can carry a few rings or earrings (or the SD cards for your printer) in his backpack, also there is a “hidden” compartment inside his head, you can remove his cap.:)

We prepared a LOT of different versions, depending on your preferences:
–Two Piece versions (single and multicolor 3mf with 4 colors)
 
–Multi Part versions (like this you can use any combinations and colors of filaments)

–Keychain versions (it’s a full piece version with a height of 53mm, it’s half the size of the original one, it has a little hook on the backpack)
 
-And lastly: in Batch versions (for people who want to print big quantities and for our Authorized Sellers, so like this they can print it the most cost-effective way)
 

We always appreciate the feedbacks, let us know which versions you find the most useful, which are the ones you prefer the most! It helps us to determine how to prepare our future designs too, so they can become the most useful to you!:)

———————————–
Print difficulty level: Beginner to intermediate

Recommended print settings: (If you use Bambu or Orca slicer, all the print settings are automatically loaded in each version’s 3mf files)

-Layer height: 0.16mm

-Wall loops: 2

-Infill: 8%, Gyroid

-Supports: Auto Tree supports, TopZ distance: 0.23, BottomZ distance: 0.16, top interface layers:3, top interface spacing: 0.2mm

————————————

“STEAL THEIR LOOK!” instructions:

Version1 – Multi part version on separate plates, no painting

Printer: Bambu P1S

Filaments: Bambu PLA Matte filaments

Instructions:
Step1: Print each part on the plates from the included 3mf file, and choose which colors of filaments you want to print it with

Step2: Assemble the parts and your Ring Bearer Mushroom is ready!:)

—————————

Version2 : Multi Part or 2 Piece versions

Filaments: Bambu Matte White PLA

Printer: Bambu P1S

Primer: Rust-Oleum Painter’s Touch Spray Paint White

Paint: Fantastory Craft Acrylic Paint Set 
OR if you have an airbush set: Airbrush Paint – 30 Colors

Clear coat finish seal: Rust-Oleum Matte Clear Coat or if you want glossy look Rust-Oleum Clear Gloss

Painting & Post-processing steps:

Step1: Apply Rust-Oleum Painter’s Touch Spray Paint White as a base primer. Let them dry completely.

Step2: Painting: Paint with your chosen color from the acrylic paint set or if you have airbrush set, you can paint with that too, definitely much faster and you can paint some nice gradients with it:)

Step3: Seal with Rust-Oleum Matte Clear Coat for a subtle finish or Clear Gloss for a shiny effect.

Step4: Assemble the 2 piece or the multi part version’s pieces:)

———————————-

►CLICK HERE for all the latest models from the SEREV3d Current download links board (Accessible for active paid members)

——————————-

Do you want to be a “Serev3D Maker of the Month”?

Participate by tagging us @serev3d and use #serev3d in your social media posts, so we can find & repost your awesome prints and give you shoutouts!

  • After every Serev3D print you do and make a post by tagging us, we’ll give you some Serev3D Maker Gems💎 for it, by the end of each month, we’ll take a look on the list of people who collected the most Maker Gems💎 and give the reward for the Maker of the Month:

1 Maker Gem💎: Posting your make in our Serev3D Patreon Printing Group or in our Patreon Chats.

2 Maker Gems💎: Posting your make on your own social media profile (instagram, fb, tiktok etc.) and tag @serev3d or use #serev3d on the post.

3 Maker Gems💎: Posting your make in –> any of these 3d printing Facebook groups and using the hashtag #serev3d in your description .

The Maker of the Month reward for January will be a $40 Bambu Store Gift card!

We will announce the chosen Maker at the end of the month!:)
—–>Check out who got the award for last month here!<—–
Have fun, we are looking forward to see your 3d prints!