►Click here to grab Snoopy and all our latest designs from the SEREV3d Current download links board (Accessible for paid members)

In the downloaded folder you can find 3 different versions of Snoopy: candle holder and a pen/brushes holder version, which has a deeper cup part, and a Multicolor 3mf version too!

Recommended filaments:

►Polymaker PLA Matte

Or, you can use gradient & dual silk filaments:

►ERYONE Silk Dual Color PLA Filament

►iSANMATE Matte Gradient

Blue to white heat color changing filament (Ice Snoopy)
►TRONXY Color Changing with Temperature Blue to White
(Or if the other is low on stocks)
►Gizmo Dorks PLA Filament Blue to White


Tealights:

24 Pack Flameless LED Tea Lights Candles


Print difficulty level: Beginner

Print settings:

(If you use Bambu or Orca slicer, all the print settings are automatically loaded in the 3mf file)

-Layer height: 0.16-0.2mm (within this range it works well, the lower the layer height, the less you can see the layer lines)

-Wall loops: 2 (if you want slightly stronger walls, you can also put it to 3)

-Infill: 10%, Gyroid

-Support: Add Auto Tree supports with a TopZ distance of 0.28, and BottomZ distance 0.2, for an easier-simpler support removal.

We updated the download with MultiColor 3mf version as well, for people with an AMS system on their printers:

———————————–

Resources for painting and post processing:

Filament: Polymaker PLA Matte White

Filler Primer: Rust-Oleum Filler and Sandable Primer Spray 

Sandpaper: 3m Pro Grade Grit: 120, 3m Pro Grade Grit:220, 3M Wet or dry Sandpaper Grit: 600
 and/or Bates- Sandpaper, 18 Pack, 12 Grits, 120 to 3000

Primer: Rust-Oleum Painter’s Touch Spray Paint White

Paint: Fantastory Craft Acrylic Paint Set

Clear coat finish: Rust-Oleum Matte Clear Coat or if you want glossy look Rust-Oleum Clear Gloss

Painting and post-processing instructions (optional, you can always use pretty gradient, silk or dual silk filaments too, which gives pretty colors without the need of painting)

if you have a multi-color AMS printer, you can also just print the colored 3mf file, but in our opinion, a real post-processing will always give a more real lifelike touch and originality to the prints!)

Post-processing steps:

  • Sanding: Start with coarse sandpaper (120 grit) to smooth layer lines, then use finer grits (220) and lastly (400-600) for a more polished surface.

  • Filler Primer: Apply a filler primer coat to cover imperfections. Let it dry completely.

  • Wet Sanding: Use 400-600 grit sandpaper for wet sanding the primer, repeating as needed for smoothness.

  • Final Primer Coat: Apply a thin layer of regular primer to create an even base for painting.

Painting & Sealing: Paint with your chosen color from the acrylic paint set, then apply a clear coat (matte or glossy) for protection and finish.

 (Allow each layer to dry fully before moving to the next for the best results.)

►Click here to grab Snoopy and all our latest designs from the SEREV3d Current download links board (Accessible for paid members)

—————————————————
Have fun, we are looking forward to see your 3d prints!

Don’t forget to show off your awesome creations, or make requests for future designs on:

►Our Patreon chats: https://www.patreon.com/serev3d/chats

►Or in our SEREV3d facebook group: https://www.facebook.com/groups/1569100737016945

Other popular 3d print groups to show off your makes:
–3d Printing for Beginners and Pros
–F**k that, I’ll just 3D print it!
–3D Printing ⚙️